All Products

Showing 21–35 of 35 results


  • Material:
    Body Leaded Low carbon steel or equivalent. Case hardened.
    Ball stud Medium carbon steel, ball is induction hardened.
    Inner retaining clip and safety clip Hard drawn spring steel.

    Protective Finish:
    Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.

    • Based Upon Din 71802 Series
    • The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
    • Spanner flats on ball stud and body facilitate assembly.
    • Once assembled, the ball stud cannot be removed.
  • Material:
    Body Leaded Low carbon steel or equivalent. Case hardened.
    Ball stud Medium carbon steel, ball is induction hardened.
    Inner retaining clip and safety clip Hard drawn spring steel.

    Protective Finish:
    Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.

    • Based Upon Din 71802 Series
    • The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
    • Spanner flats on ball stud and body facilitate assembly.
    • Once assembled, the ball stud cannot be removed.
  • Material:
    Body Leaded Low carbon steel or equivalent. Case hardened.
    Ball stud Medium carbon steel, ball is induction hardened.
    Inner retaining clip and safety clip Hard drawn spring steel.

    Protective Finish:
    Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.

    • Based Upon Din 71802 Series
    • The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
    • Spanner flats on ball stud and body facilitate assembly.
    • Once assembled, the ball stud cannot be removed.
  • Material:
    Body Leaded Low carbon steel or equivalent. Case hardened.
    Ball stud Medium carbon steel, ball is induction hardened.
    Inner retaining clip and safety clip Hard drawn spring steel.

    Protective Finish:
    Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.

    • Based Upon Din 71802 Series
    • The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
    • Spanner flats on ball stud and body facilitate assembly.
    • Once assembled, the ball stud cannot be removed.
  • Material:
    Medium carbon steel or equivalent, ball is induction hardened.

    Protective Finish:
    Zinc plated de embrittled and passivated

    • Compatible with CBJ Ball Joints
    • The Spanner flats are standard to facilitate assembly
    • Inch sizes are also available
    • Non-standard ball studs are available subject to quantity
  • Material:
    Medium carbon steel or equivalent, ball is induction hardened.

    Protective Finish:
    Zinc plated de embrittled and passivated

    •  DIN 71803
    • Compatible with CBJ Ball Joints
    • Special sizes are also available subject to quantity
  • Material:
    Medium carbon steel or equivalent, ball is induction hardened.

    Protective Finish:
    Zinc plated de embrittled and passivated

    • The hexagon flats are standard to facilitate assembly
    • Metric sizes are also available
    • Non-standard ball studs are available subject to quantity
  • Material: MN65 Spring Steel, hardened and tempered.
    Protective Finish:
    Zinc plated, de-embrittled & Passivated

    • Easily assembled and removed by hand, without special tools.
    • Compatible with CPM Clevis Pins.
    • Safety lip prevents accidental removal and assembly rattle is eliminated by the fastener concave back holding the Clevis Pin under tension. Plated SFM Fasteners are routinely de-embrittled.
    • RCM Clips are available and provide an alternative fastening method.
    • Inch sizes of this range are also available.
  • Material: MN65Spring Steel, hardened and tempered.

    Protective Finish: Zinc plated, de-embrittled & Passivated

    • Easily assembled and removed by hand, without special tools. They m ay also be assembled along a shaft.
    • The dished form ensures Clip is under compression to minimise rattle. The Plated RCM Clips are routinely de-embrittled
    • For use with CPM Clevis Pins.
    • SFM Safety Fasteners provide an alternative fastening method.
  • Material: Spring Steel C60 to CK 75 according to DIN 17222; hardened and annealed to 460 to 580 HV ( equivalent to 46 – 54 HRC )

    Protective Finish: Mechanically Galvanised

    • DIN 6799 Series.
    • These Lock washers can be used with grooved shafts, assembly is possible with our without tools and the washers are removable.
    • Optional surface finishes include Phosphated, or galvanized in white, blue or yellow
  • Material:
    Body and bearing Low carbon steel.
    Bearing Burnished.
    Bearing race PTFE Composite.

    Protective Finish: Body Zinc plated and passivated.

    • DIN ISO 12240-4 (DIN 648)
    • PTFE bearing race gives this Rod End self lubricating properties combined with excellent chemical and corrosion resistance.
    • Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
    • MR Rod Ends are also available with male bodies and with studs.
  • Material:
    Body and bearing Low carbon steel.
    Bearing Burnished.
    Bearing race PTFE Composite.

    Protective Finish: Body Zinc plated and passivated.

    • DIN ISO 12240-4 (DIN 648)
    • PTFE bearing race gives this Rod End self lubricating properties combined with excellent chemical and corrosion resistance.
    • Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
    • Also available with Left Hand Thread. e.g. MRML10P = Left Hand
  • Material:
    Body and bearing Low carbon steel.
    Bearing Burnished.
    Bearing race PTFE Composite.

    Protective Finish: Body Zinc plated and passivated.

    • DIN ISO 12240-4 (DIN 648)
    • PTFE bearing race gives this Rod End self lubricating properties combined with excellent chemical and corrosion resistance.
    • Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
    • MR Rod Ends are also available with male bodies and with studs.
  • Material:
    Body and bearing Low carbon steel, heat treated or equivalent
    Bearing Chromium Steel, heat treated and hard chrome plated
    Bearing race Bronze

    Protective Finish: Body Zinc plated and passivated.

    • DIN ISO 12240-4 (DIN 648)
    • Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
    • Rod Ends are also available with male bodies and with studs.
    • Requires lubrication via grease nipple
  • Material:
    Body and bearing Low carbon steel, heat treated or equivalent
    Bearing Chromium Steel, heat treated and hard chrome plated
    Bearing race Bronze

    Protective Finish: Body Zinc plated and passivated.

    • DIN ISO 12240-4 (DIN 648)
    • Exceptional axial and radial loads and safety feature give confidence in load bearing applications.
    • Rod Ends are also available with male bodies and with studs.
    • Requires lubrication via grease nipple
  • Gas Strut Fittings

    Gas Strut Fittings


Showing 21–35 of 35 results