MC & MCL Metric Series Clevises to DIN 71752

Material: Low carbon steel.

Protective Finish: Zinc plated & Passivated

  • Based upon Din Standard 71752
  • MC & MCL Clevises are machined for precision, and available in both standard and long series. Threads and pitches are to ISO standards coarse or fine. Cross hole deburred on all four faces to facilitate assembly of clevis pin.
  • All MC & MCL Clevises are compatible with SPM & SPML Spring Pins or CPM Clevis Pins.
  • Inch sizes of this range are also available.
  • For Stainless Steel Clevis Assemblies or left hand threads and non-standard Clevises. Please contact us.

Description

Part No Thread K ISO Pitch
Coarse
ISO Pitch
Fine
A Ø B
+0.06
-0.00
Width C
Nominal
D E F Ø G H Weight per 100 in Kgs
MC4 M4 0.7 8 4.00 4 8 21 8 8 6 0.3
MCL4 16 29 0.7
MC5 M5 0.8 10 5.00 5 10 26 10 9 7.5 0.9
MCL5 20 36 1.3
MC6 M6 1 12 6.00 6 12 31 12 10 9 1.4
MCL6 24 43 2.1
MC8 M8 1.25 16 8.00 8 16 42 16 14 12 3.6
MCL8 32 58 16 5.2
MC10 M10 1.5 1.25 20 10.00 10 20 52 20 18 15 7.3
MCL10 40 72 10
MC12 M12 1.75 1.25 24 12.00 12 24 62 24 20 18 11.5
MCL12 48 86 16.6
 MC14  M14  2.0 1.5 27  14.00  14  28 72 28  24  22.5   17.0
 MCL14 57 101 29 24.8
 MC16  M16  2.0 1.5  32  16.00  16  32 83 32   26  24  26.6
 MCL16 64 115 38.9
 MC18  M18  2.5 1.5  36  18.00  18  36 94 36  30  27  39.0
 MC20  M20  2.5 1.5  40  20.00  20  40 105 40  34  30  55.3
 MC25  M24  3.0 2.0  50  25.00  25  50 132 50  42  36  111