Safety Fasteners and Retainer Clips

Showing all 4 results


  • Material: MN65 Spring Steel, hardened and tempered.
    Protective Finish:
    Zinc plated, de-embrittled & Passivated

    • Easily assembled and removed by hand, without special tools.
    • Compatible with CPI Clevis Pins.
    • Safety lip prevents accidental removal and assembly rattle is eliminated by the fastener concave back holding the Clevis Pin under tension. Plated SFI Fasteners are routinely de-embrittled.
    • Metric sizes of this range are also available.
  • Material: MN65 Spring Steel, hardened and tempered.
    Protective Finish:
    Zinc plated, de-embrittled & Passivated

    • Easily assembled and removed by hand, without special tools.
    • Compatible with CPM Clevis Pins.
    • Safety lip prevents accidental removal and assembly rattle is eliminated by the fastener concave back holding the Clevis Pin under tension. Plated SFM Fasteners are routinely de-embrittled.
    • RCM Clips are available and provide an alternative fastening method.
    • Inch sizes of this range are also available.
  • Material: MN65Spring Steel, hardened and tempered.

    Protective Finish: Zinc plated, de-embrittled & Passivated

    • Easily assembled and removed by hand, without special tools. They m ay also be assembled along a shaft.
    • The dished form ensures Clip is under compression to minimise rattle. The Plated RCM Clips are routinely de-embrittled
    • For use with CPM Clevis Pins.
    • SFM Safety Fasteners provide an alternative fastening method.
  • Material: Spring Steel C60 to CK 75 according to DIN 17222; hardened and annealed to 460 to 580 HV ( equivalent to 46 – 54 HRC )

    Protective Finish: Mechanically Galvanised

    • DIN 6799 Series.
    • These Lock washers can be used with grooved shafts, assembly is possible with our without tools and the washers are removable.
    • Optional surface finishes include Phosphated, or galvanized in white, blue or yellow

Showing all 4 results