ILMF Series Inline Ball Joint
Material:
Body Leaded Low carbon steel or equivalent. Case hardened.
Ball stud Medium carbon steel, ball is induction hardened.
Inner retaining clip and safety clip Hard drawn spring steel.
Protective Finish:
Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.
- Based Upon Din 71802 Series
- The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
- Spanner flats on ball stud and body facilitate assembly.
- Once assembled, the ball stud cannot be removed.
| Part No | Thread ISO A |
C |
D | E | F | G | H | J | M | Q |
Weight Per 100 in Kgs |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ILMF6 | M6 x 1.0 |
25.0 |
11.5 | 6 | 8 | 14.8 | 10 | 11 | 8 | 12.5 | 2.8 |
| ILMF8 | M8 x 1.25 |
30.0 |
14.0 | 8 | 11 | 19.3 | 13 | 13 | 11 | 16.5 | 4.9 |
| ILMF10 | M10 x 1.5 |
35.0 |
15.5 | 10 | 14 | 24.0 | 16 | 16 | 14 | 20.0 | 8.3 |