CPM Series Metric Clevis Pins
Material: Low carbon steel.
Protective Finish: Zinc plated & Passivated
- Use with Clevises based upon DIN 71752
- Designed for use with MC & MCL Clevises.
- CPM Pin lead-in chamfer helps assembly into the Clevis and subsequent fastener assembly. They can be fastened with either SFM Safety Fasteners or RCM Retaining Clips.
- Inch sizes of this range are also available and subject to quantity, special Clevis Pins are available including Hardened and Cross Hole versions . Please contact us.
| Part No | Ø A | B | C | Ø D | E | F | Ø H | M | N | Weight per 100 in Kgs |
|---|---|---|---|---|---|---|---|---|---|---|
| CPM4 | 4.00 | 8.250 | 1.5 | 6 | 0.50 | 0.74 | 3.20 | 0.75 | 2.10 | 0.12 |
| 3.93 | 8.125 | 0.64 | 3.10 | 1.90 | ||||||
| CPM5 | 5.00 | 10.250 | 1.0 | 8 | 0.50 | 0.84 | 4.10 | 0.50 | 2.60 | 0.30 |
| 4.93 | 10.125 | 0.64 | 3.90 | 2.40 | ||||||
| CPM6 | 6.00 | 12.250 | 1.5 | 9 | 0.75 | 0.84 | 5.10 | 0.75 | 3.10 | 0.40 |
| 5.93 | 12.125 | 0.64 | 4.90 | 2.90 | ||||||
| CPM8 | 8.00 | 16.250 | 2.0 | 12 | 1.00 | 1.04 | 6.10 | 1.00 | 3.60 | 0.90 |
| 7.91 | 16.125 | 0.84 | 5.90 | 3.40 | ||||||
| CPM10 | 10.00 | 20.250 | 2.5 | 14 | 1.00 | 1.15 | 8.20 | 1.25 | 4.60 | 1.80 |
| 9.91 | 20.125 | 0.95 | 7.80 | 4.40 | ||||||
|
CPM12 |
12.00 | 24.250 | 3.0 | 16 | 1.25 | 1.25 | 9.70 | 1.25 | 5.10 | 3.00 |
| 11.89 | 24.125 | 1.05 | 8.80 | 4.90 | ||||||
|
CPM14 |
14.00 | 27.250 | 3.0 | 18 | 1.25 | 1.35 | 10.2 | 1.25 | 5.60 | 4.2 |
| 13.89 | 27.125 | 1.15 | 9.80 | 5.40 | ||||||
| CPM16 | 16.00 | 32.250 | 3.5 | 20 | 1.50 | 1.45 | 12.2 | 1.50 | 6.10 | 6.7 |
| 15.89 | 32.125 | 1.25 | 11.8 | 4.90 |