ILIM Series Inline Ball Joint
Material:
Body Leaded Low carbon steel or equivalent. Case hardened.
Ball stud Medium carbon steel, ball is induction hardened.
Inner retaining clip and safety clip Hard drawn spring steel.
Protective Finish:
Body, ball stud and inner retaining clip Zinc plated and passivated; ball stud and ring are de-embrittled. The assembly is lubricated.
- Based Upon Din 71802 Series
- The polyurethane liner combined with a high performance grease provide superior wear properties combined with excellent chemical resistance.
- Spanner flats on ball stud and body facilitate assembly.
- Once assembled, the ball stud cannot be removed.
| Part No | Thread UNF A |
C |
D | E | F | G | H | J | M | Q |
Weight Per 100 in Kgs |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ILIM250 | 1/4 |
1.040 |
.492 | .160 | .315 | .582 | .394 | .433 | .315 | .492 | 2.8 |
| ILIM312 | 5/16 |
1.280 |
.650 | .200 | .433 | .760 | .513 | .513 | .433 | .650 | 4.9 |
|
ILIM375 |
3/8 |
1.535 |
.787 | .200 | .550 | .945 | .630 | .630 | .550 | .787 | 8.3 |