CPI Series Clevis Pins
Material: Low carbon steel.
Protective Finish: Zinc plated & Passivated
- Use with Clevises based upon DIN 71752
- Designed for use with IC & ICL Clevises.
- CPI Pin lead-in chamfer helps assembly into the Clevis and subsequent fastener assembly. They can be fastened with SFI Safety Fasteners.
- Metric sizes of this range are also available and, subject to quantity, special Clevis Pins are available including Hardened and Cross Hole versions . Please contact us.
| Part No | Ø A | B | C | Ø D | E | F | Ø H | M | N | Weight PER 100 in Kgs |
|---|---|---|---|---|---|---|---|---|---|---|
| +/- 0.006 | +/- 0.006 | +/- 0.006 | +/- 0.006 | |||||||
| CPI187 | 0.1875 |
0.3850 |
0.050 | 0.250 | 0.02 | 0.028 | 0.140 | 0.030 | 0.095 | 0.3 |
| 0.1855 |
0.3800 |
0.020 | 0.132 | 0.090 | ||||||
| CPI250 | 0.2500 |
0.5100 |
0.062 | 0.343 | 0.03 | 0.034 | 0.193 | 0.030 | 0.115 | 0.5 |
| 0.2470 | 0.5050 | 0.026 | 0.185 | 0.110 | ||||||
| CPI312 | 0.3125 | 0.6350 | 0.078 | 0.437 | 0.04 | 0.041 | 0.240 | 0.040 | 0.135 | 0.9 |
| 0.3095 | 0.6300 | 0.033 | 0.232 | 0.130 | ||||||
| CPI375 | 0.3750 | 0.7600 | 0.090 | 0.500 | 0.04 | 0.045 | 0.301 | 0.050 | 0.172 | 1.5 |
| 0.3720 | 0.7550 | 0.037 | 0.285 | 0.167 | ||||||
| CPI500 | 0.5000 | 1.0100 | 0.110 | 0.625 | 0.05 | 0.054 | 0.388 | 0.060 | 0.213 | 3.4 |
| 0.4970 | 1.0050 | 0.046 | 0.372 | 0.208 |